NEX Hotshoe Adapter - NEX-3, -5, -5N only

The nexproshop.com "Schadow" NEX Hotshoe Adapter arrived three weeks after ordering (U.S.A. - E.U. - Customs - me).
Cover: plastic, mounting screw does not fit - does not permit to turn enough revolutions, it gives resistance and stops with the shoe still loose. The design of this construction is such, that you cannot hold the screw with two fingers when turning. This is a hassle even after the thread of the screw had been reworked. It seems to me, this hotshoe adapter has never ever seen a NEX in its short live before.
Rework: Can be opened very easy by loosening four screws. Rework the thread and make a slot in the head.
And now some pictures with remarks giving additional information. Click on the picture to see an enlarged view.

01 Mounting Screw - a standard M2.5mm Nut stops at this position

02 A standard M2.5 screw with square nut

03 Fits

04 A collection of M2.5 screws

05 With this design it is very difficult to tighten the screw, even when the thread is finally O.K. A slot in the head makes this an awful lot easier - but also the possibility to overtighten the screw: the thread in the bracket inside the camera has a thickness of about 1mm.

06

07 The label on the bottom is required to compensate for the missing quality-feeling. But the shoe is being delivered within a professional box made from cartoon, black finish, hard cushion inside - designed for safe transportation.

08

09 The Euro one cent coin should provide some comparison for size

10 Here shown are the pins being used, pin 5 syns (red wire), logic ground is on pin 4 (not being used) and 12 (black wire). The remaining 12 pins are connected to 12 pads on top, waiting for some hacker to be used, also providing room for improvements, expansions, additions. More details about the functions of these pins see within this blog, and also the links here provided.

11 The whole electronic within this shoe. Click on the picture

12 Pin 5 and 12 going here through the print to solder pads.

 

And finally two pictures taken with flash, the first one at 1/250s, second at 1/320s. (Standard for the NEX is 1/160s.)

NEX-5/V04, ISO 400, WB Flash.

Lens: 1:2.8 24mm ø55mm MINOLTA MD W. ROKKOR, F11, random distance.

Flash: Philips P532 Thyristor Computer, direkt, Wide, f 11, Automatic, 46V on its contacts to ignite the flash - but for a very limited period of time only.

Pictures have been taken late in the evening, sufficient light for the human eye but very low light for taking pictures. The LCD panel stayed black, nothing could be seen with the lens at F11. Nor is it possible to focus (old manual lens).

A lot of discussion can be read and participated here:

http://forums.dpreview.com/forums/readflat.asp?forum=1042&thread=41300051&page=6

after 150 entries, this thread has been reopened at:

http://forums.dpreview.com/forums/readflat.asp?forum=1042&message=41693000

More testing and experience is needed with this hotshoe adapter.

Older "High-voltage" Flash units are not supported, how they can be reworked to make them fit is shown by this sample:

Flash 280V -› 6V

http://www.instructables.com/id/Taming-the-high-trigger-voltage-of-the-Vivitar-283/

Another interesting project ist discussed here.

Yongnuo RF-603c transmitter merged onto/with the HVL-F7S:

http://forums.dpreview.com/forums/read.asp?forum=1042&message=41595167

See also two entries further within this blog.

18mm flange focal distance ? A matter of gambling ?

Several User Guides for different models of Sony NEX Cameras mention the flange focal distance with "ca." or "about" 18mm. When given in inch, this measurement differs by 0,25mm. When adapting old lenses onto the NEX, very often we see reports about incorrect position on the scale of the lens versus actual distance of the object, maybe leading the producer of the adapter to make it a tiny bit shorter, to be able to guarantee correct focus all over and up to infinity distance. Not only does this worsen the closest position one can focus on, it also makes the scale on the lens useless, and furthermore prevents to adjust the focus of the lens when taking pictures of the moon, stars, etc. Now what is actually the cause of such problem, the camera, the adapter, or more unlikely the lens itself ?
For that reason, I wanted to know - what is the correct and exact flange distance for the NEX camera:
March 11th, 2012 - Asking Sony by using a form on their web site - asking for the exact flange distance of NEX-5N
all following correspondence by eMail:
March 14th - Sony: asking "what model of NEX ?" (method of delaying ?)
March 15th - my reply   (in German and English, as the Sony EU HQ is in U.K.)
March 20th - Sony: internal inquiry needed   (only dummies in Germany Support ?)
May 7th - me, asking for an answer     (yes, I'm still alive, my asking was serious)
May 16th - Sony: your question has been forwarded again to the appropriate department (it's not me, it's them)
May 19th - Sony:
We are sorry to tell you, that we do not have information about the exact flange focal distance.
("Wir bedauern Ihnen mitteilen zu müssen, dass uns das gewünsche genaue Auflagemaß nicht vorliegt.")
After more then two months, they cannot provide such simple und single detail ? Cannot ? Or more likely - do not want to - do not want to admit - the precision is limited by the tooling used, no final adjustments like shimming taking place, not on the camera, nor on the lenses? The correct operation is guaranteed and compensated for by means of electronic control as long as appropriate Sony devices and components are being used....?
Sony - is it sooo complicated to explain that, or what is the problem ? Would it help me learning Japanese ? And what about you - do you know more about this?
My conclusion: The flange focal distance of the NEX' is circa/about 18mm, precision a matter of good luck.

DIY PC Flash Connector for NEX modifiying HVL-F7S

Update May 25th:
Yongnuo RF-603c transmitter merged onto/with the HVL-F7S
http://forums.dpreview.com/forums/read.asp?forum=1042&message=41595167
                                               ____________ 


PC Port output on HVL-F7S (Sony NEX) without PREFLASH!!!  Started by fabianbono at http://forums.dpreview.com/forums/readflat.asp?forum=1042&message=41568077
THANK YOU fabianbono for sharing !
Read also page 5 and on:
http://forums.dpreview.com/forums/readflat.asp?forum=1042&thread=41300051&page=5
continued (because closing after 150 entries) with
http://forums.dpreview.com/forums/readflat.asp?forum=1042&message=41693000

Rework of Sony Flash HVL-F7S

Howto dismantle:
   http://kundweb.netatonce.com/~u23400/Dismount.htm  - he refers to Pate Ganzel, and here he says:
      "After some advice from Pete Ganzel (thanks allot) i started to take away the sides from the flash body. I don’t take any responsibilities if other doing the same. This modification will ruin the grantee of the Flash  and maybe also the Camera."
      - furthermore showing step by step how to dismantle the tiny Sony flash HVL-F7S. At http://kundweb.netatonce.com/~u23400/ describing his rework into a macro flash.
   http://info.xitek.com/product/201203/12-75575.html  also showing this details.
Go to http://translate.google.com and enter the address http://info.xitek.com/product/201203/12-75575.html
   and  http://forum.xitek.com/forum-viewthread-tid-970489-ordertype-1-highlight-f7s-page-1.html

"the use of an opto-isolator would be safer for the camera. (eg MOC3030 + a resistance for LED)" Thanks j13l !

The light can't be seen yet

The answer on my two questions in my mail was for a third I didn't ask at all. No mention on what we like to know. Hence my new reply, dated May 8th, 2012, as follows:
QUOTE
Hi J...
Your answer did not cover any one of my two questions.
#1 -   You are right, I also would not recommend the direct mounting of a heavy flash unit directly onto the hot shoe for mechanical reason. Now, think of it as mounted on a bracket and connected by a PC-cable. And based on that, the technical question:
What is the maximum trigger voltage of a flash unit connected to the adapter ?
For reference, to better understand this question, I provide two links:
  http://www.botzilla.com/photo/strobeVolts.html
  http://www.lowcost4dslr.com/tuto/20-measureflashtriggervoltage
#2 -   About logistic
how long is the delivery time for this product ?  How long will it last, when I put your product in the cart, payment immediately, until you are putting it into the mail ?
UNQUOTE
Is my english so bad ? Or shouldn't a six year old kid understand what I'm asking for ?
Or - he simply doesn't know !! And the product itself is just in the stage of some planning.
Stay tuned, I'll keep you updated on that immediately when any information arrives. Up to now - just silence.
-
Update:
Still silentium. May 24th: still silence on this bothersome mail.
Asking through different channel provided an answer for the delivery time, shipping just starts. For the order of one, shipping details have been provided.
Performance:
See my entry above, May 31st 2012

We see light in the tunnel ??

There might be a product available sometime in the future, which will solve the problem of the missing flash connection. An adapter, to be mounted on the feature connector on top of the camera, providing a hot shoe and a PC connector. I'm going to supply additional information, as soon as I get an answer on my questions concerning maximum trigger voltage, and the delivery time for this product. There has been a specific internet shop established, which is quite impressive for the first look, but in reality this adapter is the only product of the shop, and it leaves some questions in the open. Once this shop and their product has been proven to be serious, I'm also publishing its address.
Later on I like to report here also any experience gained when using this adapter.
The pricing is somewhat on the high side plus shipping costs, there is a second shop address available (for "Asia-Customer"?) promising no shipping costs.
As said, some questions are still open.
At this point of time, there is just pre-ordering (and pre payment) taking place. Hoping the planning is not also in the state of "pre".